Type of material: Photopolymers
RGD720, VeroClear-RGD810 - this photopolymer combines transparency, stability of sizes and smooth surface. It will be an ideal choice for prototyping transparent and tinted articles from points and ray filters to medical devices.
And due to systems СоnnехЗ you will be able to mix transparent and colour materials for receipt of effect of stained glass.
Material RGD720 (is not available) is a multi-purpose transparent photopolymer PolyJet, reproducing standard transparent plastics. It combines a high stability of dimensions and different surface smoothness.
Photopolymer VeroClear-RGD810 is material of general purpose, tough, almost colourless, with different stability of dimensions. It differently will suit for models with fine details, as well as replacement of the organic glass.
Elastic materials are accessible as well in translucent type. That is, you will be able to receive translucent models with various эластомерными specifications. It is possible to combine with colour materials in the Connex3 systems for receipt of different shades, as well as a series of the values of hardness and transparency.
Print translucent models
Due to 3D to Connex3 printer you can combine transparent and colour materials, in order to create, for example, accurate templates, or to receive translucent details with various shades. Unite in one model transparent, opaque, elastic or polypropylene like materials.
Plenty of application variants
Transparent materials will be an ideal decision in following cases:
Tensile capacity | 50-65 MPa |
Bending strength | 80-110 MPa |
Impact strength on Izodu (with notch) | 20-30J/m |
Hardness on Shoru | 87-88 D |
Temperature of start of deformations (at 0,45 MPA) | 45-50 ºС |
Density | 1,18-1,19 g/sm3 |
Minimum wall thickness | 0,3 mm |
Minimum diameter of the aperture | 1,5 mm |
Measurement | 0,02 mm |
Maximum size of the model | 342х342х200 mm |