Type of material: Photopolymers
RGD835, RGD875, RGD840, TangoPlus FLX930, TangoPlus FLX980, High Temperature RGD525, RGD720, TangoBlack FLX973, VeroClear RGD810.
Due to Elastic photopolymers PolyJet you can produce models with various values of hardness, aspect ratio and resistance to breakage. This material achievable grey, black and white colors, as well as in translucent variant. In such a manner, these materials are suitable for prototyping of extensive coverage of end products, from rubbered handles soft by feel to shoe production. And with the aid of system СоnnехЗ can be mixed elastic materials with color, adding thereby necessary coloring. It will add realism to your prototype models not having analogues.
3D printing with elastic models
The series of Elastic photopolymers (ruler Таngо) offers materials with various values of elastic specifications , including Hardness on Shoru, aspect ratio at breakage, resistance to breakage and tensile capacity. These materials will be useful for plenty of tasks, including:
Ruler of elastic models
Systems Соnnех enable to create Digital materials, in which Elastic photopolymers are combined with Tough opaque. In such a manner, it is possible to receive plenty of various values of hardness on Shoru, breaking strength and resistance to breakage. As well given materials can be combined with tough color for formation of shades and among themselves.
Tensile capacity | от 30-70 MPa |
Bending strength | от 40-110 MPa |
Impact strength on Izodu (with notch) | от 20-40J/m |
Temperature of start of deformations (at 0,45 MPA) | от 40-60 ºС |
Density | 1,12-1,13 g/sm3 |
Minimum wall thickness | 0,3 mm |
Minimum diameter of the aperture | 1,5 mm |
Measurement | 0,02 mm |
Maximum size of the model | 342х342х200 mm |