Type of material: Photopolymers
FullCure 950 TangoGray, FullCure 930 TangoPlus, TangoBlack FLX973, TangoBlackPlus FLX980. Due to Elastic photopolymers you can produce models with various values of hardness, aspect ratio and resistance to breakage. This material is avaliable in grey, black and white colors, as well as in translucent variant. In such a manner, these materials are suitable for prototyping extensive coverage of end products, from soft by feel rubbered handles to shoe production. And with the aid of system СоnnехЗ can be mixed elastic materials with colour, adding thereby necessary окрас. It will add realism to your prototype models not having analogues.
3D printing with elastic photopolymer
The series of elastic photopolymers (ruler Таngо) offers materials with various values of elastic specifications , including hardness on Shoru, aspect ratio at breakage, resistance to breakage and tensile capacity. These materials will be useful for plenty of tasks, including:
Elastic models ruler includes
System Соnnех3 enables to create Digital materials, in which Elastic photopolymers are combined with Tough opaque. In such a manner, it is possible to receive plenty of various values of hardness on Shoru, breaking strength and resistance to breakage. As well given materials ruler can be combined with tough colour, for formation of shades, and among themselves.
Tensile capacity | от 0,8-5 MPa |
Permanent deformation at compression | 0,5-1,5 |
Hardness on Shoru | от 26-77 D |
Density | 1,16-1,17 g/sm3 |
Minimum wall thickness | 0,3 mm |
Minimum diameter of the aperture | 1,5 mm |
Measurement | 0,02 mm |
Maximum size of the model | 342х342х200 mm |