Materials
Aluminium alloy
Type of material: Metal
Typical aluminium alloys CL 30AL and CL 31AL apply in production of facilitated details for automobile and aerospace branches.
Colors avaliable:
from 190 Rub per sm3
Aluminium alloy (powder), with chemical compound, pursuant to DIN EN 1706 AlSi12 (a) CL 30AL is powder aluminium-silicon alloy of general purpose for 3D of the stamp of facilitated details for automobile and aerospace branches.
Chemical compound:
Element Content (%)
Al based
Si 10,5 - 13,5
Mg 0 - 0,05
Fe 0 - 0,55
Mn 0 - 0,35
Ti 0 - 0,15
Cu 0 - 0,05
Zn 0 - 0,10
C 0 - 0,05
Ni 0 - 0,05
Pb 0 - 0,05
Sn 0 - 0,05
Powder of aluminium alloy CL30AL is used for additive production of facilitated single or serial articles working in the conditions of high mechanical and dynamic loads in the area of motor car industry and aerospace domain.
| Yield strength Re | 170-220 N/mm2 |
| Strength at stretching Rm | 310-325 N/mm2 |
| Aspect ratio А | 2-3 % |
| Young's modulus | около 75 kilo N/mm2 |
| Thermal conductance | 120-180 W/m*К |
| Minimum wall thickness | 0,5 mm |
| Minimum diameter of the aperture | 1,5 mm |
| Measurement | 0,05 mm |
| Maximum size of the model | 250х250х270 mm |