Materials
АBS similar
Type of material: Photopolymers
They allow to create realistic and accurate tools and prototype models which as well possess strength and thermostability.
Colors avaliable:
from 128 Rub per sm3
3D printing with Digital ABS photopolymers
Digital ABS (created inside 3D printer from RGD515 and RGD535) is developed for reproduction of plastics standard ABS by the way of combining of thermostability and elasticity. Digital ABS2 possesses the same properties plus different rigidity and elasticity in walls thinner 1,2 mm. Both materials will be a different choice, when high crashworthiness and depreciation of drop loads is required. On those ratings they are the leaders of the technology PolyJet.
Digital ABS и Digital ABS2 are brilliant for:
- Functional prototypes
- Equipment for manufacturing
- Forms, including forms for castings
- Details with connections on catches, including subjected warming
- Details for electronics, case, the case of motors mobile phones
- Casing and details
| Tensile capacity | 55-60 MPa |
| Bending strength | 65-75 MPa |
| Impact strength on Izodu (with notch) | 65-80J/m |
| Hardness on Shoru | 85-87 D |
| Temperature of start of deformations (at 0,45 MPA) | 58-68 ºС |
| Density | 1,17-1,18 g/sm3 |
| Minimum wall thickness | 0,3 mm |
| Minimum diameter of the aperture | 1 mm |
| Measurement | 0,02 mm |
| Maximum size of the model | 342х342х200 mm |